header
facebook_iconheader2homewhat_is_steer_clearpurchasephotoslinkscontactnav_spacer


40ford  40ford 40ford 40ford 40ford 40ford

WELCOME TO WIZARD FABRICATION!

Wizard Fabrication, located in Sacramento, CA., is the manufacturer of Steer Clear Offset Steering Coupler.

Steer Clear was one of more than 1,400 newly introduced products on display at the Specialty Equipment Market Association (SEMA) Show in Las Vegas, NV., when it was presented with two of the industries most prestigious awards - The 2006 Best Engineered New Product Award Winner, and The 2006 Best New Street Rod or Custom Car Product Runner-Up.

For decades, custom car designers, builders, and owners have been limited and frustrated by one of the industries most common problems - steering clearance.

This includes clearance problems encountered under the hood - limits on engine choice, fitting a high performance engine & headers, clearance problems related to motor mounts, starter, and header location, and safety concerns over extreme u-joint angles and binding - as well as clearance problems found inside the vehicle - poor steering column location, limited foot & leg room, awkward position & unnatural feel of the steering wheel and pedals, and all too often, an uncomfortable car.

Wizard Fabrication's Steer Clear offers you a complete solution to all of these issues - it provides almost unlimited options for steering shaft clearance so a high performance engine and headers will fit, and it allows you to safely reposition the steering column to increase legroom and improve comfort.



Steer Clear is made from the highest quality materials, attested by our demanding standards, and guaranteed to be free of defects in material
and workmanship, for life!

  bayone_55

Designed to Increase Your Options
Steer Clear is sleek and compact. It takes up a minimal amount of space and can be mounted on either side of the firewall at any angle necessary. The four reinforced through-holes assure you a strong, secure installation.

Steer Clear makes it possible to raise or drop the steering shaft, move it over, or change its angle, options that will increase clearance so you can fit just about any engine you choose.

Steer Clear is functional and designed to work in addition to an existing steering system. It is made using 3/4" 36 spline input & output shafts and works with commonly available u-joints, couplers, vibration reducers, etc.

Steer Clear's design is detail-oriented and perfectly proportioned - it blends in, looks great, and looks like it belongs on any vehicle that it's installed in.

Steer Clear is versatile. It has been used in custom builds, street rods, newer vehicles, offroad vehicles, jeeps, and water craft, etc

Steer Clear is available in five standard lengths - 8", 10", 12", 14" & 16" (measured input to output shaft), and it comes in either a brushed (satin) finish or a polished finish.

pagano_pg1

"I've got the STEER CLEAR in a '69 Chevy Truck I built & it works GREAT. Thanks for a great product. - Roger Ferris


Safety, Quality & Reliability
By eliminating extreme u-joint angles and binding, Steer Clear improves road feel, drive ability, and safety. You get an amazingly smooth performance that is durable and reliable.

Steer Clear is made from the highest quality materials, to our demanding standards, and guaranteed to be free of defects in material and workmanship, for life!

 

facebook

 

Get The Comfort You Deserve
Steer Clear makes it possible for you to safely relocate the steering column. By raising the column - so it comes out above your feet instead of between them - you create additional floor space and legroom which improves driver comfort. And by increasing usable floor space it's possible
to move the pedals and position them for individual preference. Plus you can reposition the steering wheel to give it a more natural and comfortable feel.

A customized fit for maximum driving comfort!

foose_pg1

After installing Steer Clear in his Foose-built 34
Ford, 6' 7" Ray has enough room to stretch his
legs out and drive in comfort.

steer_clear

Dimensions
Shaft to Shaft Overall Case Measurement Width x Depth
8" 12" 4-1/4" x 1-1/2"
10" 14" 4-1/4" x 1-1/2"
12" 16" 4-1/4" x 1-1/2"
14" 18" 4-1/4" x 1-1/2"
16" 20" 4-1/4" x 1-1/2"
     

The Complete Solution to Steering Clearance Problems

Steer Clear makes it possible for you to raise or drop the steering shaft, move it over or change the angle, options
that increase clearance so you can fit just about any engine you choose. It also eliminates the clearance problems
related to motor mounts, starter & header location.

Steer Clear makes it possible!

Steer Clear is versatile. It can be used in custom builds, street rods, newer vehicles, offroad vehicles, jeeps, water craft, etc.

Steer Clear measures 4-1/4” wide by 1-1/2” deep and is available in five standard lengths - 8”, 10”, 12”, 14” & 16” (measured input to output shaft) and it comes in either a satin or polished finish.




#wizardsteerclear
bottom_bar